DIN-MNT
DIN Rail Mounting Kit

DIN rail mounting kit for IO-HUB. Designed to allow for any orientation of the device on the rail. Heavy-duty, spring-loaded clip allows easy installation and removal while providing secure attachment.
Learn More
The IO-HUB-4-E is Teknic's flexible EtherNet/IP I/O module, designed for OEMs and machine builders who need distributed I/O that adapts to their machine's requirements. Whether you're building a new automation system or expanding an existing EtherNet/IP network, the IO-HUB-4-E provides a versatile interface for connecting sensors, switches, and actuators to your PLC.
Use the IO-HUB-4-E alongside ClearPath-IP integrated servo motors to create a complete EtherNet/IP motion system, or deploy it as a standalone controller for advanced distributed I/O applications. Its modular architecture simplifies machine design, reduces wiring complexity, and makes it easy to scale your system as application requirements grow. With seamless integration into standard EtherNet/IP PLCs and industrial networks, the IO-HUB-4-E delivers a flexible solution for a wide range of automation applications.
| Mechanical | |
| Dimensions | 5.0" x 3.5" x 1.0" (127mm x 88.9mm x 25.4mm) |
| Weight (with cover) | 0.42lb (189g) |
| Material | 3mm thick Polycarbonate cover, aluminum mount frame |
| Mounting | Panel mount; optional DIN-rail mounting accessory |
| Electrical | |
| Voltage Input | 10-28 VDC, 24 VDC nominal |
| I/O Hub Power Consumption | 300 mA @ 24 VDC |
| IP Rating | IP20 |
| Certifications | CE Pending, RoHS |
| Operating Temperature/Humidity | -20°C to 50°C / 0-90% non-condensing |
| Storage Temperature | -40°C to 85°C |
| Power Consumption | 300mA@24V |
| Protection Features |
Overcurrent protection on all outputs Inductive clamping on all outputs Board master overvoltage and overcurrent protection ESD protection features on all I/O circuits |
| I/O Capability | |
| Total I/O Points | 13 |
| General-Purpose I/O | Yes; directly readable/writable by EtherNet/IP master/scanner |
| I/O Configuration | Software configurable |
| Analog Inputs | Up to 13 |
| Analog Input Types | 0-10 V or 4-20 mA |
| Analog Output | 1, on I/O-12 only |
| Analog Output Type | 0-20 mA or 4-20 mA; 0-10 V with external shunt resistor |
| Digital Input Compatibility | NPN, PNP, switch-contact devices |
| Digital Output Modes | Push-pull (PWM capable) or open-collector |
| Output Current Capability | 750mA RMS (1000mA peak) per output; 1.5A RMS (2A peak) per 4-output group; 4A RMS (7A peak for 10ms) total |
| Maximum Capacitive Load | 250 µF collectively across I/O power pins |
| I/O Indicators | Individual LED indicator for each I/O point |
| External Encoder Input | 1 |
| Encoder Type | Differential quadrature A/B/I, RS-422 |
| Maximum Encoder Count Rate | 10 MHz |
| Encoder Courtesy Power | 5 VDC, up to 300 mA |
| Motion Capability | |
| ClearPath-IP Axes | Up to 4 |
| Motor Synchronization | IP-Sync™, sub-200 ns synchronization |
| Motion-Specific I/O Functions | Home, ± Limit, Stop Sensor, Position Capture, Brake Output |
| Communication | |
| Industrial Network | EtherNet/IP |
| Ethernet Ports | 2 |
| Ethernet Interface | Built-in two-port switch |
| Ethernet Speed | 10Base-T / 100Base-TX |
| Recommended Ethernet Cable | CAT5e or better |
| USB | USB 2.0, configuration only |
| EtherNet/IP Device Arrangement | Hub appears as a single EtherNet/IP device for connected motors and I/O |
| PLC Compatibility | EtherNet/IP master/scanner |
ClearPath-IP combines an EtherNet/IP vector servo drive, brushless servo motor, and high-resolution encoder into a single package, saving space and eliminating complex and failure-prone cabling. Pair ClearPath-IP with the IO-HUB to easily connect up to four motors, and connect general purpose I/O to an EtherNet/IP Scanner. Built-in IP-Sync™ technology enables sub 200-nanosecond synchronization. Watch the video below to learn more about ClearPath-IP.
DIN Rail Mounting Kit

DIN rail mounting kit for IO-HUB. Designed to allow for any orientation of the device on the rail. Heavy-duty, spring-loaded clip allows easy installation and removal while providing secure attachment.
Learn MoreController Cable, 10 ft

Cat5e cable used to connect an IO-HUB with an EtherNet/IP master, or another EtherNet/IP device (including another IO-HUB). A flexible, snag-free, cable boot protects the plug an makes it easy to depress the locking clip.
Learn More24 VDC Power Supply

General-purpose, 156-watt, logic power supply; can be used to power your IO-HUBs, Brakes, and ClearPath motor logic power backup through a POWER4-HUB.
Learn More