Teknic homepage
0 |
Teknic, Inc. > Power Distribution Boards

Power Distribution Boards

For IP67/66K Sealed Motors:
Power Hub

DC Power Distribution Hub
Part Number: POWER4-HUB-S
Input: Bus Power: 24-75 VDC (nominal); Logic Power: 12-75 VDC (12-24 VDC typical)
Output: Distributes the applied input voltages
Connectors: Bus Power Input: 2-pin Sabre (x2); Logic Power: 2-pin Molex Minifit, Jr. (2x); Bus Power Output : 4-pin Molex (x4)
Dimensions, in (mm): 3.6 x 2.4 (91.9 x 59.7) Certifications: UL recognized, cUL recognized, CE

Routes and distributes main bus & logic power for up to four ClearPath motors. With logic power backup, the motors will retain encoder position and communication ability (for ClearPath-EC or ClearPath-SC) even with bus power removed (for example, during a safety E-stop). Upon restoration of bus power, the motors will automatically return to their last commanded position, if properly configured to do so.
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$37Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days. Quantities greater than 5 will ship within three weeks.

2D Drawing
3D Drawings
Power Strip

DC Bus Distribution Strip
Part Number: POWER4-STRIP-S
Input: Bus power, 24-75 VDC (nominal)
Output: Distributes the applied input voltages
Connectors: Bus Power Input: 2-pin Sabre (x2); Bus Power Output : 4-pin Molex (x4)
Dimensions, in (mm): 3.6 x 2.4 (91.9 x 59.7)
Certifications: UL recognized, cUL recognized, CE

Distributes DC bus power to up to four ClearPath motors. Requires 24-75 VDC bus power supply.
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$37Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days. Quantities greater than 5 will ship within three weeks.

2D Drawing
3D Drawings
For IP53 Motors:
Power Hub

DC Power Distribution Hub
Part Number: POWER4-HUB
Input: Bus Power: 24-75 VDC (nominal); Logic Power: 15-30 volts
Output: Distributes the applied input voltages
Connectors: Bus Power: 2-pin Sabre; Logic Power: 2-pin Molex MiniFit Jr.
Dimensions, in (mm): 3.06 x 4.12 (77.7 x 104.7)
Certifications: UL recognized, cUL recognized, CE

Distributes DC bus power to up to four ClearPath motors. Requires 24 volt power to operate (in addition to bus power). The Power Hub also acts as logic power backup for the motors, i.e., the motors will still retain encoder position and communication ability (for ClearPath-SC) even with bus power removed (for safety during an E-stop, for example). Upon restoration of bus power, the motors will automatically return to their previous positions, if desired.
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$52Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days. Quantities greater than 5 will ship within three weeks.

2D Drawing
3D Drawings
Power Strip

DC Bus Distribution Strip
Part Number: POWER4-STRIP
Input: Bus power, 24-75 VDC (nominal)
Output: Distributes the applied input voltages
Connectors: Bus Power: 2-pin Sabre (Input x1, Output x 5)
Dimensions, in (mm): 3.6 x 2.4 (91.9 x 59.7)
Certifications: UL recognized, cUL recognized, CE

This 6-port power breakout board / terminal block routes power from a DC power supply (such as the IPC-5) up to 5 ClearPath motors. Any single connector can act as the DC voltage input (24Vdc to 75Vdc), while the remaining 5 connectors would function as power outputs, providing the input source voltage to all attached ClearPath motors.
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$37Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days. Quantities greater than 5 will ship within three weeks.

2D Drawing
3D Drawings