Teknic homepage
0 |
Teknic, Inc. > Model Information
Your gearbox part number selection has been updated to accurately reflect all specs and pricing. To undo, select the previous gearbox ratio in either location.

CPM-SDHP-N1433P-ELN

NEMA 143 ClearPath-SDHP Model
Gallery Gearbox gallery

Downloads

ClearPath Integral HP 2D Drawings pdf
3D Drawings / Solid Models zip
ClearPath User Manualpdf
About this Product

The ClearPath-SDHP model allows you to precisely servo-control position (and velocity) using “step & direction” (or quadrature A/B) command signals. These digital signals are commonly used to control stepper motors and digital servos, so they are available from a wide variety of products including PLCs and stand-alone motion control “indexers”. Compared to ClearPath-SDSK models, which also use step & direction control signals, the SDHP models have more peak torque, and come standard with enhanced positioning resolution for a moderately higher price.

1. Choose a frame size
NEMA 56 cutout
selected
NEMA 56
ClearPath connector cutout
selected
IEC D100
2. Select motor options
Note: Changing any motor options will update your part number
3. Add a gearbox (optional):
In many motion systems, there are two big benefits of using a gearbox: torque multiplication and inertia reduction. If you need a gearbox, select from one of the options below. Not sure? This motion article will explain it in more detail.
Built-to-Order gearboxes are available for this frame size. Changing any gearbox options will alter your gearbox part number.
4. Add Selected Models
Motor Pricing
Qty:1-910-4950-99100-199200+
$1,300 Register for Volume Pricing
Gearbox Pricing
Qty:1-910-4950-99100-199200+
Register for Volume Pricing
Motor
Gallery
CPM-SDHP-N1433P-ELN
Ships in: 3 Days

Gearbox
gearbox
---
Ships in: 3 Days

Total: $1,300
Add to Cart
5. Add Required Accessories
Certain accessories are required (e.g. controller cable) to use your ClearPath motor. We also offer several helpful accessories that are optional depending on the nature of your application.

Torque/Speed Data and Specs

Modify the Controls below to update the torque/speed curve for your specific application.
Torque/Speed Curve
Controls
Input Voltages
Torque/Speed Modifiers
Units:
Add Gearing:
None
Teknic Gearboxes
Configure a gearbox in the previous section to view accurate torque/speed curve and specs.
Single-Stage
Double-Stage
Custom/Third-Party Gearing ?
:1
Motor Specifications
Input Voltage110 VAC 1-ph208 VAC 1-ph208 VAC 3-ph230 VAC 1-ph230 VAC 3-ph380 VAC 5-w415 VAC 5-w
Peak Torque
Cont. (RMS) Torque
Max Speed
Motor Peak Power
Motor Cont. (RMS) Power

More Specifications

Motor Frame SizeNEMA 143 - 7.47 in (189.74 mm) sq.
Length9.22 in (234.19 mm)
Input Voltage Range
Input Voltage for 5-wire systems		100-240 VAC (1- or 3-phase)
300-415 VAC (3-phase, 5-wire)
Achievable Resolution 0.029 degrees
Repeatability 0.006 degrees
Shaft Diameter1 0.875 in (22.23 mm)
Weight25.2 lb (11.4 kg)
Rotor Inertia103.9 oz-in² (19.0 kg-cm²)
Controller Signal I/O Voltage Range4.0 to 28 VDC
Maximum Radial Load 170 lbf (756.2 N)
Maximum Thrust Load40 lbf (177.9 N) in; 70 lbf (311.4 N) out
Ambient Temperature2-40° to +70° C
Ambient Humidity 0-95%; non-condensing
Environmental Protection (IP Rating) IP67/66K
Regulatory CertificationsUL Listed for use up to 240 VAC;
CE certified for use up to 415 VAC; RoHS
Country of OriginUSA
Warranty3 Years

1 A NEMA 56 option with a shaft diameter of 0.625 in (15.88 mm) is also available. This part is available here.

2The RMS torque limit on certain motors is derated for operation in ambient temperatures above +40 degrees C. Contact Teknic for derating assistance.

Output Shaft Diameter---
Weight---
Efficiency---
Backlash---
Nominal Torque Output---
Maximum Acceleration Torque1---
E-stop Torque---
Nominal Input Speed3000 RPM
Maximum Input Speed6000 RPM
Gearbox Inertia---
Maximum Radial Load---
Maximum Axial Load---
Environmental RatingIP54
Ambient Operating Temperature-15°C to 90°C
Minimum Service Life20000 hours
Audible Noise---
Grease TypeSynthetic grease
Country of OriginChina
Warranty1 year

1 Ensure the gearbox's maximum acceleration torque meets or exceeds your motor's peak torque rating, or torque limit the motor accordingly.

Operating Modes

loading

One ClearPath input counts steps from your motion controller, the other input determines if the steps are made in the clockwise or counter-clockwise direction.
watch video
Quadrature input allows you to use the output of a quadrature encoder to command position and speed. Or, you can use an indexer or PLC with quadrature outputs to command at a speed that is 4x the output frequency (because each edge counts as a "step").
ClearPath Accessories
Accessories Guide

ClearCore

I/O and Motion Controller

ClearCore accessory

ClearCore is an industrial C++ programmable I/O and motion controller with four motion axes, analog and digital I/O, serial ports, and XBee wireless comms for Industrial IoT. Expand ClearCore for large, multi-axis systems.

Learn More

Controller Cables

10-ft and 55-ft Motor Power Cables

Controller Cables accessory

This cable connects your control signals to the ClearPath motor. The controller cable requires an 8-pin Molex Mini-fit connector on the ClearPath end.

Learn More

Gearboxes

Planetary Gearboxes

Gearboxes accessory

Configure inline or right-angle gearboxes available in multiple frame sizes, gear ratios, and output-flange configurations for maximum mounting flexibility. Select models ship in 3 days; built-to-order options ship in 4-6 weeks.

Learn More

Logic Backup Power

24 VDC Power Supply

Logic Backup Power accessory

General purpose, 156 watt, logic power supply; can be used to power ClearCore/ClearLink controllers, SC4-HUB, ASU-FR510 analog controller, or ClearPath servo motors.

Learn More

Blower Kit

AC Powered Fan and Shroud

Blower Kit accessory

The blower kit (AC powered fan and shroud) provides a significant increase in continuous torque for certain AC-input ClearPath motors.

Learn More

RES-225

Regenerate Energy Shunt

RES-225 accessory

For applications that cause significant regenerated energy, the regenerated energy shunt can be used to monitor and manage your motor's regenerative energy.

Learn More

Foot Mount

Mount and Screw Kit

Foot Mount accessory

This optional rigid base for AC-input ClearPath motors allows foot mounting (on one of three sides) in addition to standard face mounting.

Learn More

USB Setup Cable

USB Setup Cable

USB Setup Cable accessory

The USB cable connects the ClearPath motor to a Windows PC for initial setup and/or diagnostics.

Learn More

MSP

Motor Setup Program

MSP accessory

This "Motor Setup Program" software is used for initial ClearPath setup and diagnostics. You can download MSP from Teknic for free.

Learn More
Successfully added to your cart
Gallery
Required Accessories
Certain accessories are required to use your ClearPath motor. The Accessories Guide will assist you in buying all of the required and optional accessories for your specific motor.
Accessories Guide

AC Blower Kit

Blower Kit

Blower Kit
Part Number: BLOWER-1P230V
Connector: Screw Terminal Block
Length: Adds 2.12 in to motor length (see manual/3D models for specifics)
Input Power: Single-phase 190-230 VAC
Weight: 2.0 lbs

This blower kit (AC powered fan and shroud) provides a significant increase in continuous torque for certain AC-input (integral hp) ClearPath motors. Motor part numbers shown with a “_fan” after them show the increased specifications using this blower. Note that this kit is not IP rated for dust or liquid protection, and needs AC wiring separate from the motor. For wiring and installation instructions, refer to the user manual: AC Input, Integral Horsepower ClearPath Motors
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$57$56$55$54CONTACT
Share / Save Cart