*AC blower kit ships separately and requires single-phase 230VAC
The ClearPath-MCPV model gives you a simple, low-cost way to precisely control position without needing a separate motion controller or servo drive. ClearPath’s innovative servo control algorithm provides excellent tracking accuracy and fast settling time, even with very large inertial loads.
|Motor Frame Size||IEC D100* - 7.09 in (180.09 mm) sq.|
|Length||11.26 in (286.00 mm)|
|Input Voltage RangeInput Voltage for 5-wire systems||100-240 VAC (1- or 3-phase)300-415 VAC (3-phase, 5-wire)|
|Peak Torque (@230 VAC 3-ph)||4,652 oz-in (32.9 N-m)|
|Cont. (RMS) Torque (@230 VAC 3-ph)||1,891 oz-in (13.4 N-m)|
|Max Speed (@230 VAC 3-ph)||2760 RPM|
|Achievable Resolution||0.090 degrees|
|Shaft Diameter||1.103 in (28.00 mm)|
|Weight||28.3 lb (12.8 kg)|
|Rotor Inertia||104.9 oz-in² (19.2 kg-cm²)|
|Controller Signal I/O Voltage Range||4.0 to 28 VDC|
|Maximum Radial Load||170 lbf (756.2 N)|
|Maximum Thrust Load||40 lbf (177.9 N) in; 70 lbf (311.4 N) out|
|Ambient Temperature2||-40° to +70° C|
|Ambient Humidity||0-95%; non-condensing|
|Environmental Protection (IP Rating)||IP65; blower kit not IP rated|
|Regulatory Certifications||UL Recognized for use up to 240 VAC;CE certified for use up to 415 VAC; RoHS|
|Country of Origin||USA|
2The RMS torque limit on certain motors is derated for operation in ambient temperatures above +40 degrees C. Contact Teknic for derating assistance.
|ClearPath Integral HP 2D Drawings.pdf||2D Drawing|
|CPM-D100xx.zip||3D Drawings / Solid Models|
|ac_clearpath-mc-sd_manual.pdf||ClearPath User Manual|
Control your ClearPath-MC servo systems with a ClearCore™ or ClearLink™ Motion & I/O Controller. ClearCore is a C++ programmable controller for general-purpose machine control, while ClearLink adds motion and I/O capability to any EtherNet/IP-compatible PLC.
With either controller you can coordinate up to four ClearPath-MC motors per controller. You can also control 13 software-configurable, analog and digital I/O points (up to 24VDC). Both controllers can be networked to control larger systems with more motors, and you can use I/O expansion modules to increase the I/O count.
Part Number: BLOWER-1P230V
Connector: Screw Terminal Block
Length: Adds 2.12 in to motor length (see manual/3D models for specifics)
Input Power: Single-phase 190-230 VAC
Weight: 2.0 lbs
|Qty 1-9||Qty 10-49||Qty 50-99||Qty 100-199||Qty 200+|