NEMA 23 ClearPath-ECSK Model
Part Number:

CPM-ECSK-2316F-RLSB

Select Motor Options
Note: Changing any motor options will update your part number

ClearPath-ECSK combines a conformance-tested EtherCAT vector servo drive, brushless servo motor, and high-resolution encoder into one waterproof and dustproof package, saving space and eliminating complex and failure-prone cabling. Compared to ClearPath-ECHP models, the ECSK models have less peak torque, but are a lower price for any given amount of continuous (RMS) shaft torque and power.

Purchase
Motor Quantity Pricing
Qty:1-910-4950-99100-199200+
$669 Register for Volume Pricing
CPM-ECSK-2316F-RLSB
Ships in 3 Days (first 5 units)

Complete Your ClearPath System
Certain accessories are required (e.g. controller cable) to use your ClearPath motor. We also offer several helpful accessories that are optional depending on the nature of your application.

Torque/Speed Data at

Specifications at 75 VDC
Peak Torque
Cont. (RMS) Torque
Max Speed
Peak Power
Cont. (RMS) Power
Graph Legend
Peak TorqueCont. (RMS) Torque at 30°C

 

 

Speed (RPM)
Torque (oz-in)
Torque (N-m)

More Specifications

Motor Frame SizeNEMA 23 - 2.33 in (59.18 mm) sq.
Length3.59 in (91.19 mm)
Input (bus) Voltage Range24-75 VDC (90 VDC max)
Peak Torque (@75 VDC)181 oz-in (1.3 N-m)
Cont. (RMS) Torque (@75 VDC)33 oz-in (0.2 N-m)
Max Speed (@75 VDC)5000 RPM
Achievable Resolution 0.03 degrees
Repeatability 0.03 degrees
Shaft Diameter 0.375 in (9.53 mm)
Weight1.5 lb (0.7 kg)
Rotor Inertia0.4 oz-in² (0.1 kg-cm²)
General Purpose Input Voltage Range4.0 to 28 VDC
EtherCAT Device Profile DS402/CiA402
EtherCAT Modes of Operation Cyclic Synchronous Position, Velocity, Torque (CSP, CSV, CST) modes; Multiple Homing Modes
Maximum Radial Load 25 lbf (111.2 N)
Maximum Thrust Load5.0 lbf (22.2 N)
Ambient Temperature1-40° to +70° C
Ambient Humidity 0-100%
Environmental Protection (IP Rating) IP67 & IP66K
Regulatory Certifications3UL (pending); cUL (pending); CE (pending); RoHS
Safety2Supports STO (IEC 60204-1) Safety Requirements
Country of OriginUSA
Warranty3 Years

1The RMS torque limit on certain motors is derated for operation in ambient temperatures above +40 degrees C. Contact Teknic for derating assistance.

2Wired according to Teknic's instructions, ClearPath surpasses STO (IEC 60204-1) Safe Stop 0 safety requirements. Contact Teknic for more information.

3A ClearPath servo system consists of a servo motor and a servo drive built into a single unit. The servo motor portion of the ClearPath system is UL-recognized. The UL status of the servo drive is pending and expected in late 2024.

AC Blower Kit

Blower Kit

Blower Kit
Part Number: BLOWER-1P230V
Connector: Screw Terminal Block
Length: Adds 2.12 in to motor length (see manual/3D models for specifics)
Input Power: Single-phase 190-230 VAC
Weight: 2.0 lbs

This blower kit (AC powered fan and shroud) provides a significant increase in continuous torque for certain AC-input (integral hp) ClearPath motors. Motor part numbers shown with a “_fan” after them show the increased specifications using this blower. Note that this kit is not IP rated for dust or liquid protection, and needs AC wiring separate from the motor. For wiring and installation instructions, refer to the user manual: AC Input, Integral Horsepower ClearPath Motors
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$57$56$55$54CONTACT