Teknic homepage
0 |
Teknic, Inc. > ClearPath® Accessories Guide > Accessories Guide SD-DC Sealed
Show Menu
0
IPC-5
IPC-5
350/500 Watt DC Power Supply
  • Part Number: IPC-5
  • Output: 75 VDC, 350 W cont. (500 W fan-cooled), 900 W peak
  • Input: 108-250 VAC
  • Connectors: 8-pin Molex Mini-fit (input) and 2-pin Sabre (output)
  • Dimensions, in (mm): 7.20 (183) x 5.20 (132) x 2.26 (57.3)
  • Weight, lbs (kg): 2.25 (1.02)
  • Certifications: UL, CE
  • More more IPC-5 info
Low Voltage (75 VDC) "Intelligent Power Center" power supply optimized for motor drive bus power. Compatible with ClearPath NEMA 23 and 34 integrated servos, and Eclipse and Meridian 2xx-5xx series products.
IPC-3/5 User Manual
3D Drawings
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$248Register for Volume PricingCONTACT
IPC-5See
pricing
above		 Bracket Add to cart
IPC35-CABLE110
110VAC line cord		$14
Quantities up to 5 generally ship within 3 business days.

The "Add to Cart" button will add one of each component (power supply and cable) unless you edit the quantities. Type "0" for the quantity of any component you don't want to add to your cart.

IPC-5IPC35-CABLE110
110VAC line cord
See pricing above$14
Add to cart
The "Add to Cart" button will add one of each component (power supply and cable) unless you edit the quantities. Type "0" for the quantity of any component you don't want to add to your cart.
Quantities up to 5 generally ship within 3 business days.
IPC-3
IPC-5
225 Watt DC Power Supply
  • Part Number: IPC-3
  • Output: 75 VDC, 225 W cont., 900 W peak
  • Input: 108-250 VAC
  • Connectors: 8-pin Molex Mini-fit (input) and 2-pin Sabre (output)
  • Dimensions, in (mm): 7.13 (181) x 5.20 (132) x 2.26 (57.3)
  • Weight, lbs (kg): 2.11 (0.96)
  • Certifications: UL, CE
  • More more IPC-5 info
Low Voltage (75 VDC) "Intelligent Power Center" power supply optimized for motor drive bus power. Compatible with ClearPath NEMA 23 and 34 integrated servos, and Eclipse and Meridian 2xx-5xx series products.
IPC-3/5 User Manual
3D Drawings
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$199Register for Volume PricingCONTACT
IPC-3See
pricing
above		 Bracket Add to cart
IPC35-CABLE110
110VAC line cord		$14
Quantities up to 5 generally ship within 3 business days.

The "Add to Cart" button will add one of each component (power supply and cable) unless you edit the quantities. Type "0" for the quantity of any component you don't want to add to your cart.

IPC-3IPC35-CABLE110
110VAC line cord
See pricing above$14
Add to cart
The "Add to Cart" button will add one of each component (power supply and cable) unless you edit the quantities. Type "0" for the quantity of any component you don't want to add to your cart.
Quantities up to 5 generally ship within 3 business days.
IPC35-CABLE110
IPC35-CABLE110
AC Power Cable for IPC-3 and IPC-5
  • Part Number: IPC35-CABLE110
  • Connectors: 8-pin Molex Mini-fit to U.S. standard 3-prong 120V AC plug (NEMA 5-15)
  • Length: 1.98 m (6.5 ft)
AC Power (120VAC) Cable for IPC-3 and IPC-5 motor drive power supplies.
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$14Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

POWER4-STRIP-S
POWER4-STRIP-S
DC Bus Distribution Strip
  • Part Number: POWER4-STRIP-S
  • Input: Main bus power, 24-75 VDC
  • Output: Distributes the applied input voltages
  • Connectors: Main Bus Input: 2-pin Sabre (x2); Main Bus Output : 4-pin Molex (x4)
  • Dimensions, in (mm): 3.6 x 2.4 (91.9 x 59.7)
Distributes DC bus power to up to five IP67/66K ClearPath motors. Requires 24-75 VDC bus power supply.
2D Drawing
3D Drawings
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$34Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

PC-SBR-72
PC-SBR-72
DC Power Cable, IPC to POWER4-HUB, 6 ft
  • Part Number: PC-SBR-72
  • Connectors: Main Bus Input: 2-pin Sabre; Main Bus Output: 2-pin Sabre
  • Length: 1.83 meters (6 ft)
Cable used to supply 75 volt bus power from an IPC-5 or IPC-3 to any Teknic power distribution breakout board (POWER4-HUB, POWER4-STRIP-S, POWER4-HUB-S). Can also be used to daisy-chain two power distribution boards.
2D Drawing
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$18Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

POWER4-HUB-S
POWER4-HUB-S
DC Power Distribution Hub
  • Part Number: POWER4-HUB-S
  • Input:Main bus power, 24-75 VDC; Logic power, 12-75 VDC (12-24 VDC typical)
  • Output: Distributes the applied input voltages
  • Connectors: Main Bus Input: 2-pin Sabre (x2); Logic Input: 2-pin Molex Minifit, Jr. (2x); Output : 4-pin Molex (x4)
  • Dimensions, in (mm): 3.6 x 2.4 (91.9 x 59.7)
Routes and distributes main bus & logic power for up to four ClearPath motors. With logic power backup, the motors will retain encoder position and communication ability (for ClearPath-EC or ClearPath-SC) even with bus power removed (for example, during a safety E-stop). Upon restoration of bus power, the motors will automatically return to their last commanded position, if properly configured to do so.
2D Drawing
3D Drawings
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$34Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

CPM-CABLE-M2P2P-120
CPM-CABLE-M2P2P-120
24 Volt Power, 2-Pin Molex Cable
  • Part Number: CPM-CABLE-M2P2P-120
  • Connectors: 2-pin Molex to 2-pin Molex
  • Length: 3.05 m (10 ft)
Logic power cable compatible with several Teknic power distribution breakout & accessory boards including the SC4-HUB, POWER4-HUB, POWER4-HUB-S, and the ASU-FR510. This cable can also be used to daisy-chain power between boards or it can be cut to length for flying lead termination at the logic power supply.
2D Drawing
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$13Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

PWR-IO-24VDC
PWR-IO-24VDC
24 VDC Power Supply
  • Part Number: PWR-IO-24VDC
  • Output Voltage: 24 VDC
  • Output Current: 6.5 Amps
  • Input Voltage: 85-264 VAC, auto-selected
  • Dimensions: 159x97x30mm (6.26x3.82x1.18 in.)
General purpose, 156 watt, logic power supply; can be used to power ClearCore/ClearLink controllers, SC4-HUB, ASU-FR510 analog controller, or ClearPath servo motors, including those connected via the POWER4-HUB and POWER4-HUB-S.

Protection: Short circuit / Overload / Over-voltage / Over-temperature. Compliance with UL62368-1, EN61558-1/2-16. Operating temperature -25 to 50 deg. C with no derating.
3D Drawings
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$39Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

CPMS-CABLE-PWR-KM120
CPMS-CABLE-PWR-KM120
DC Motor Power Cable, IP67/66K ClearPath, 10 ft
  • Part Number: CPMS-CABLE-PWR-KM120
  • Connectors: M12 K-code (1x); 4-pin Molex Minifit (1x)
  • Length: 3.05 m (10 ft)
10-foot power cable with an M12 K-coded connector on one end and a 4-pin Molex Minfit connector on the other end. This cable is typically used to connect either Teknic Power Distribution Board (POWER4-STRIP-S or POWER4-HUB-S) to an IP67/66K ClearPath motor.
2D Drawing
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$49Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

CPMS-CABLE-PWR-KK660
CPMS-CABLE-PWR-KK660
DC Motor Power Cable, IP67/66K ClearPath, 55 ft
  • Part Number: CPMS-CABLE-PWR-KK660
  • Connectors: 5-pin M12 K-code to 5-pin M12 K-code
  • Length: 16.76 m (55 ft)
55-foot power cable with M12 K-coded connectors on both ends of the cable. It has ClearPath power connectors on both ends, so this cable is designed to be cut-to-length to make two shorter cables, or one long cable, with flying leads at one end. The flying leads end is generally terminated with a Molex 4 pin connector so it can be used with one of Teknic's Power Distribution boards (POWER4-STRIP-S or POWER4-HUB-S). See the ClearPath user manual for connector and mating component part numbers.
2D Drawing
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$140Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

CLCR-4-13
ClearCore
ClearCore Controller
  • Part Number: CLCR-4-13
Each ClearCore Industrial I/O and Motion Controller handles up to 4 axes of high-speed step & direction motion, and provides 13 software-configurable I/O points (fully protected and 24 VDC compatible). An extensive C++ Motion and I/O Library makes coding easier and more productive.
Specs & Pricing
Qty 1-910-4950-99100-199200-319320-9991000+
$99
$149		$99
$124		$99
$110		$99$96$94CONTACT
Product Overview
Specs and Accessories
CLNK-4-13
ClearLink
ClearLink EtherNet/IP Motion & I/O Controller
  • Part Number: CLNK-4-13
ClearLink EtherNet/IP Industrial I/O and Motion Controller. 4 axes of step & direction output; 13 configurable I/O points (24 VDC compatible); 1 serial port and 1 I/O expansion port.
Specs & Pricing
Qty 1-910-4950-99100-199200-319320-9991000+
$249Register for Volume PricingCONTACT
Product Overview
Specs and Accessories
CPMS-CABLE-CTRL-AM120
CPM-CABLE-CTRL-MU-120
Controller Cable, IP67/66K ClearPath, 10 ft
  • Part Number: CPMS-CABLE-CTRL-AM120
  • Connectors: 8-pin Molex Mini-fit to 8-pin M12 A-code
  • Length: 3.05 m (10 ft)
Controller cable that connects your digital control signals to your IP67/66K ClearPath motor. The M12 A-code connector end plugs directly into the motor while the Molex 8-pin connector end can be plugged directly into a Teknic controller, such as ClearCore, ClearLink, or the SC4-HUB (ClearPath-SC). The 8-pin Molex connector can also be cut off to create flying leads to wire into any 3rd party control device (e.g. switches, buttons, PLCs, etc.).
2D Drawing
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$54Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

CPMS-CABLE-CTRL-AA660
CPMS-CABLE-CTRL-AA660
Controller Cable, IP67/66K ClearPath, 55 ft
  • Part Number: CPMS-CABLE-CTRL-AA660
  • Connectors: 8-pin M12 A-code to 8-pin M12 A-code
  • Length: 16.76 m (55 ft)
Controller cable designed to connect your digital control signals to your IP67/66K ClearPath motor. This cable comes with M12 A-code connectors on both ends and is designed to be modified (cut to length). The M12 connector end is plugged directly into the ClearPath motor while the flying leads end would be terminated into your 3rd party control device (e.g., switches, buttons, microcontrollers, or PLCs). If you terminate the flying leads end with an 8-pin Molex, this would be compatible with Teknic's ClearCore, ClearLink, or SC4-HUB.
2D Drawing
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$145Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

CPMS-USB-IR
CPMS-USB-IR
USB-Infrared (IR) Communications Converter
  • Part Number: CPMS-USB-IR
  • Connectors: USB Type-C (x3)
  • Dimensions: 1.4 x 1.3 x 0.4 inches
Infrared converter board that provides PC USB serial communications to the IP66K/67 ClearPath infrared (IR) rear port. For MC- and SD- Series motors, this board is required in order to initially configure the motor using the ClearPath MSP software. Once the motor configured, this board is typically disconnected from the rear of the ClearPath motor. For SC-Series motors, this optional board is used for diagnostic port monitoring. You only need one board regardless of your ClearPath quantity. Requires a separate USB Type A/C cable.
2D Drawing
3D Drawings
CPMS-USB-IR
IR Converter		$11 Bracket Add to cart
CPM-CABLE-USB-118AC
USB Cable		$15
Quantities up to 5 generally ship within 3 business days.

The "Add to Cart" button will add one of each component (IR converter and cable) unless you edit the quantities. Type "0" for the quantity of any component you don't want to add to your cart.

CPMS-USB-IR
IR Converter		CPM-CABLE-USB-118AC
USB Cable
$11$15
Add to cart
The "Add to Cart" button will add one of each component (power supply and cable) unless you edit the quantities. Type "0" for the quantity of any component you don't want to add to your cart.
Quantities up to 5 generally ship within 3 business days.
CPM-COVER-USB-5PC
CPM-COVER-USB-5PC
IP67/66K ClearPath IR Sensor Cover (pack of 5)
  • Part Number: CPM-COVER-USB-5PC
Optional plastic cover that can be installed on IP67/66K ClearPath servos to protect the Infrared (IR) light sensor on the back of the motor. Note that this cover (installed or not) does not affect the IP motor rating.
2D Drawing
3D Drawings
Purchase
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$9Register for Volume PricingCONTACT

Add to cart

Quantities up to 5 generally ship within 3 business days.

CPM-MSP
MSP compatibility
Motor Setup Program
  • Part Number: CPM-MSP
  • OS Compatibility: Windows 7, 8.1, 10
This software is used to customize your ClearPath-MC or -SD motor for your application. It also provides simple, but powerful diagnostic tools to help you measure how well your motor is performing and diagnose problems you may have with the motor or mechanics. You get an unlimited license to copy and use this software upon your first purchase of a ClearPath motor.
Download

ClearPath-SD Accessories Guide

Need help purchasing the right accessories? Click to fill out the Contact Form or call Teknic to speak to an engineer about your application
How to Choose Your Accessories
SD accessories guide video layover play video
DC Power Supply & AC Power Cable
Need help purchasing the right accessories? Click to fill out the Contact Form or call Teknic to speak to an engineer about your application
  • 24-75VDC is required for ClearPath bus power. Teknic recommends 75VDC for maximum motor power.
  • ClearPath can run from power supplies up to 90VDC, but will protectively shutdown at 94VDC, so a 75VDC power supply gives you better design margin in this regard.
  • The Teknic IPC-3 and IPC-5 power supplies are designed specifically for the unique requirements of servo control- they smoothly handle regenerated energy and large peak loads. See our article for further technical details & architectural comparisons.
  • One IPC power supply can typically power up to 6 ClearPath motors (application dependent - see FAQs and/or Accessories video).
Learn More & Order
IPC-5
350/500 Watt DC Power Supply
IPC-5		Info / Order
IPC-3
225 Watt DC Power Supply
IPC-3		Info / Order
IPC35-CABLE110
AC Power Cable for IPC-3 and IPC-5
IPC35-CABLE110		Info / Order
Power Distribution Strip
Need help purchasing the right accessories? Click to fill out the Contact Form or call Teknic to speak to an engineer about your application
Logic Power Backup Shown:
  • IP67/66K ClearPath motors have dedicated inputs for both main motor and logic power. During normal operation, DC power needs to be present on both power inputs.
  • The POWER4-STRIP-S is recommended when logic backup power is not needed. This board automatically jumpers and routes power to the main bus and logic pins for up to 4 motor axes.
  • Don't need a power strip? Click here for more information.
Accessories without Logic Power Backup
Learn More & Order
POWER4-STRIP-S
DC Bus Distribution Strip
POWER4-STRIP-S		Info / Order
PC-SBR-72
DC Power Cable, 6 ft
PC-SBR-72		Info / Order
Power Distribution Hub & Cables
Need help purchasing the right accessories? Click to fill out the Contact Form or call Teknic to speak to an engineer about your application
Logic Power Backup Shown:
  • IP67/66K ClearPath motors have dedicated inputs for both main motor and logic power. During normal operation, DC power needs to be present on both power inputs.
  • The POWER4-HUB-S provides power distribution of main bus and logic power up to four (4) motor axes. With logic power backup, if bus power is removed (e.g., upon an E-stop), ClearPath will still communicate and monitor its position. So, upon restoring main bus power, ClearPath can automatically return to its correct commanded position eliminating the need to rehome. This option requires a separate logic power supply, typically 12-24 VDC.
  • Don't need a power hub? Click here for more information.
Accessories with Logic Power Backup
Learn More & Order
POWER4-HUB-S
DC Power Distribution Hub
POWER4-HUB-S		Info / Order
PC-SBR-72
DC Power Cable, 6 ft
PC-SBR-72		Info / Order
CPM-CABLE-M2P2P-120
24 Volt Power, 2-Pin Molex Cable
CPM-CABLE-M2P2P-120		Info / Order
PWR-IO-24VDC
24 VDC Power Supply
PWR-IO-24VDC		Info / Order
Motor Power Cable
Need help purchasing the right accessories? Click to fill out the Contact Form or call Teknic to speak to an engineer about your application
DC Power Cable
  • This cable connects either Power Distribution Board (POWER4-HUB-S or POWER4-STRIP-S) to the ClearPath motor.
  • The DC Power cable requires a 5-pin, M12, K-coded connector on the ClearPath end and a 4-pin Molex connector on the Power Distribution Board end.
  • The cables below can be purchased directly from Teknic or they can be easily made with the proper materials and crimp tools.
Learn More & Order
CPMS-CABLE-PWR-KM120
DC Power Cable, 10 ft
CPMS-CABLE-PWR-KM120		Info / Order
CPMS-CABLE-PWR-KK660
DC Power Cable, 55 ft
CPMS-CABLE-PWR-KK660		Info / Order
Step and Direction Controller
Need help purchasing the right accessories? Click to fill out the Contact Form or call Teknic to speak to an engineer about your application
Step and Direction Controller
  • ClearPath-SD requires a step and direction controller.
  • ClearCore is an industrial I/O and motion controller and is plug & play with ClearPath-SD servos for point-to-point applications.
  • ClearLink is an EtherNet/IP motion and I/O controller, compatible with any EtherNet/IP scanner.
Learn More & Order
CLCR-4-13
ClearCore Controller
CLCR-4-13		Info / Order
CLNK-4-13
ClearLink EtherNet/IP Controller
CLNK-4-13		Info / Order
Controller Cable
Need help purchasing the right accessories? Click to fill out the Contact Form or call Teknic to speak to an engineer about your application
Controller Cable
  • This cable connects your control signals to the ClearPath motor.
  • The controller cable requires an M12 A-coded connector on the ClearPath end.
  • The below cables can be purchased directly from Teknic.
Learn More & Order
CPMS-CABLE-CTRL-AM120
Controller Cable, 10 ft
CPMS-CABLE-CTRL-AM120		Info / Order
CPMS-CABLE-CTRL-AA660
Controller Cable, 55 ft
CPMS-CABLE-CTRL-AA660		Info / Order
USB Setup
Need help purchasing the right accessories? Click to fill out the Contact Form or call Teknic to speak to an engineer about your application
  • To eliminate a potential source of dirt/liquid ingress, Teknic developed an Infrared (IR) communications channel for setup and configuration of IP67/66K ClearPath Motors. Attach the USB-IR converter board to the rear motor USB-IR port (they are magnetically attached) to initiate communications.
  • Configuring IP67/66K ClearPath servos requires a Windows PC running Teknic's ClearPath MSP (Motor Setup Program) software, the USB-IR Converter, and a USB C cable, Type-A to Type-C.
  • After initial setup, the IR Communications Board and USB cable can be disconnected for standard application operation (but can also be used for diagnostic purposes during normal operation).
  • Teknic sells optional IR Communication Port covers in packs of 5. These covers help protect the motor's IR port when this channel is not being used.
Learn More & Order
CPMS-USB-IR
USB-Infrared (IR) Communications Converter
CPMS-USB-IR		Info / Order
CPM-COVER-USB-5PC
IP67/66K ClearPath IR Sensor Cover
CPM-COVER-USB-5PC		Info / Order
ClearPath MSP Software
Need help purchasing the right accessories? Click to fill out the Contact Form or call Teknic to speak to an engineer about your application
ClearPath MSP Software
  • This "Motor Setup Program" software is used for initial ClearPath setup and diagnostics.
  • After initial setup, the motor is disconnected during application operation (but you can also use MSP for diagnostics and troubleshooting during application operation).
  • You can download MSP from Teknic for free.
Learn More & Download
Motor Setup Program
CPM-MSP		Info / Order
SD Series
IP67/66K
IP67 motor connector
Watch the Step-by-Step Guide